User's Manual

CHAPTer 7 o DATA COLLECTION

Data DownloadFigure 7.3 –

Download Interval Data

Under the Download Interval Data section, click the Browse buon. This will

open a directory box where you can either create a new data download le log

or locate an existing download le log. Once you’ve selected an existing le or

entered the name of the new le, select Open.

Next, select the type of download to perform. The following types of download

sessions are available:

Normal –



Retrieves all interval data from the beginning of the study to the

most recent record. The number of lanes per record is determined by the

number of lanes currently congured on the sensor.

Incremental –



Retrieves only the interval data that was recorded after the

indicated date and time. The number of lanes per record is determined by

the number of lanes currently congured on the sensor.

Error Recovery –



Retrieves the entire contents of the ash memory buer.

The ash memory buer contains 2976 records and each record has data

for eight lanes. The contents of SRAM are not retrieved in this mode.

You can perform this type of download to verify the contents of the ash

memory buer in the event that a normal or incremental download does

not retrieve all the data that you expect to receive.

Once you have selected the type of download, click Download.

Note

Each time a data download is performed, a header is inserted into the log

le that indicates the date of the download.