User's Manual
96 APPeNdiX
Old SmartSensor SS105 Plug Connector Socket AssignmentFigure A.3 –
Communication between the SmartSensor and PC can be established using
the RS-232 DTE specications, along with the use of a null modem cable and
the standard 9-pin “D” male connector. Please use the following guidelines for
connecting the SmartSensor cable to the serial connection on a PC or modem
when not using a Click! 200.
Note
The RS-232 pinouts remain the same on the SmartSensor cable regardless
of whether you’re connecting to a PC or a modem. If you’re connecting to
a PC, a null modem cable is required. If you’re connecting to a modem or
other DCE device, then a straight-through serial cable is used.