User's Manual

38
CHAPTer 4 o COMMUNICATION
New Connection PageFigure 4.1 –
Clicking OK opens a connection page unique to each connection option. Each
connection page contains three function buons: Advanced, Cancel, and one
that allows you to connect or dial. The advanced functions for each connection
option are specic for each option.
Serial Connection
To make a serial connection, click the Serial (COM Port) radio buon and then
OK. The message below will appear (see Figure 4.2):
Serial ConnectionFigure 4.2 –
The three action buons appear near the boom of the page. The CONNECT
buon will aempt to connect to the sensor using the current seings. The
Cancel buon cancels the action and returns you to the New Connection page.
A message bar at the boom, identied by the icon, displays the serial
seings being used for this connection. If the default seings are used, then the
message bar will display the following:
COM - Auto; Baud - Auto; ID - Simple; Synchronize - Yes; Wait - 0