User's Manual

TMTM
Wavetronix LLC
Installing the SmartSensor
The installation of the SmartSensor HD is a process that involves five simple steps:
(1) Assemble the mounting bracket.
(2) Attach the SmartSensor HD to the mounting bracket.
(3) Mount the SmartSensor HD to a pole.
(4) Connect SmartSensor cable.
(5) Configure the SmartSensor HD.
Each step is described in detail in this section.
Step 1 – Assemble the Mounting Bracket
Secure stainless steel mounting plate (item 1) to sensor mount bracket (item 2) with enclosed
tapered mounting fasteners (item 3) as shown in Figure 1.
Figure 1 Bracket Assembly
Step 2 – Attach the SmartSensor HD to the Mounting Bracket
Take assembled sensor mount bracket from step 1 and align stainless steel mounting plate to the
threaded holes on the back of the SmartSensor. Using the remaining fasteners, attach the
assembled bracket mount to the SmartSensor. (Figure 2) Tighten until firm. DO NOT
OVERTIGHTEN FASTENERS
.
Figure 2 Sensor Attachment
7