User's Manual

TMTM

Wavetronix LLC

This can easily be done by highlighting the most significant digit (10,000) and scrolling it up past

60,000. Next click connect and you should be connected.

Figure 10

Internet Connection

If you chose “Internet” under Connection, in the communication dialog window (Figure 10) you

must then enter the Internet address (IP address & TCP port number) of the sensor of interest. The

first box is used for the IP address, which consists of four numbers ranging from 0-255 separated by

dots (‘.’). Enter the IP address assigned to either the CDMA modem or the Click! 301 Ethernet-to-

Serial adapter. The second box expects an integer value in the range of 0-65536, which is the port

number also assigned to the CDMA modem or the Ethernet-to-Serial adapter.

Once an IP address and port number are input, set the subnet and sensor ID to the correct values or

their maximum values (255 and 65535) to search for the correct values. You can then press the

Connect button to connect to the sensor.

When the connection is completed, the message “Remote connection established!” is displayed and

“Disconnect” and “Continue” buttons appear. Pressing “Continue” takes you to a screen that

displays a view of the current sensor configuration. Connection failure can occur for various

reasons, if failure occurs repeatedly call Wavetronix for assistance.