User's Manual

TMTM
3
Wavetronix LLC
Product Notifications
FCC Part 15 Compliance
This equipment complies with Part 15 of the FCC (Federal Communications
Commission) rules. Any changes or modifications not expressly approved by
the manufacturer could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Risk of Electrical Shock
An authorized electrical technician should perform installation and operation of
this unit. Persons other than authorized and approved electrical technicians
should NOT attempt to connect this unit to a power supply and/or traffic control
cabinet, as there is a serious risk of electrical shock through unsafe handling of
the power source. Extreme caution should be used when connecting this unit to
an active power supply.
Technical Service
Do not attempt to service or repair this unit. This unit does not contain any
components and/or parts serviceable in the field. Any attempt to open this unit,
except as expressly written and directed by Wavetronix will void the customer
Warranty. Any visible damage to exterior seal labels will void the Warranty.
Wavetronix is not liable for any bodily harm or damage caused if unqualified
persons attempt service or open the back cover of this unit. Refer all service
questions to Wavetronix or an authorized distributor.
Installation Safety Precaution
Caution should be used when installing any sensor on or around active
roadways. Serious injury can result when installation is performed using
methods that are not in accordance with authorized local safety policy and
procedures. Always maintain an appropriate awareness of the traffic conditions