User's Manual

41
slot 1), you can provide lane-by-lane signaling by using two Click! 112 cards for each
sensor. Each pair of Click! 112 cards are daisy chained together.
Figure 2.15 – NEMA TS-1 Rack Channel to Traffic Phase Example
With NEMA TS1 and other legacy systems the programming is often done via a
wiring panel on the side of the controller cabinet. With wired systems you will need
to verify that the wiring on the detector programming panel provides the proper
mapping from the rack channel outputs to the controller input wires dedicated for
ф1-ф8 detector calls.