User's Manual

45
The toolkit will also come with a RJ-11 patch cord with a pigtail on one end. The
pigtail is wired to the RS-485 screw terminal on the Click! 421 and can be used to
patch into RJ-11 sockets on the rack cards or PCU for troubleshooting.
Installing SSMMX
The SSMMX software is contained on a CD that is shipped with each sensor; and it
can be downloaded at http://portal.wavetronix.com. If you are unable to login, or
you do not have a username, call Wavetronix Technical Services at 801-764-0277
for assistance.
SSMMX can be run on a Windows® PC or on the handheld of the configuration
toolkit (It is not supported on other Windows® CE devices). Everything needed to
install SSMMX to a PC is contained in the SSMMX
Setup.exe file.
Follow these steps to install SSM MX on a PC:
1. Place the CD in the CD drive.
2. Double click the Setup.exe icon listed in the contents of the CD. This
executes a setup program that will copy all the necessary files to the hard
drive and place icons in the Start menu and on the desktop of the PC or
laptop (see Figure 3.2).
Note
You must have administrator rights to run the setup program
.
Note
You can check the Wavetronix portal to ensure that you have the latest version
of SmartSensor Manager Matrix. To access the portal, open a web browser and
go to portal.wavetronix.com. Login with the username “guest” and password
“wavetronix.” In the menu on the left side, select SmartSensor Products. The
latest version of the software, along with the release date, will be listed under
SS225 Software.