User's Manual

5
Introduction
In the Introduction
 SmartSensor Matrix Package
 Selecting a Mounting Location
The Wavetronix SmartSensor Matrix™ traffic sensor is a stop bar presence detector
designed for use at signalized intersections (see Figure I-1). The SmartSensor
Matrix detects vehicle demand through the use of a 24.125 GHz (K band) operating
radio frequency. Classified as a Frequency Modulated Continuous Wave (FMCW)
radar, the SmartSensor Matrix detects and reports vehicle presence in as many as
10 lanes simultaneously.
Figure I-1: Wavetronix SmartSensor Matrix
SmartSensor Matrix is a first-of-its-kind radar vision device that delivers the
reliability of radar and the simplicity of non-intrusive detection for stop bar
applications. The unit will work consistently in all weather and lighting conditions to
keep your intersection running safely and efficiently. In most situations the sensor
is installed on the roadside in order to prevent the need for lane closures and traffic
control. Once the unit is installed, the configuration process is quick and easy.
After installation, this unit will require little or no on-site maintenance and can be
remotely configured. This user guide outlines the step-by-step process of installing
and configuring the SmartSensor Matrix. Any questions about the information in
this guide should be directed to Wavetronix or your distributor.