User's Manual

58
When a connection is made to the SS200, the main menu will appear and all
configuration options will become available (see Figure 4.6).
Figure 4.6 – Main Menu (Connected)
If you have problems connecting:
1. Make sure that all power and communication wiring is correct;
2. Check the Port settings (Port ID).
Connection failure can occur for various reasons; if a failure occurs repeatedly, call
Wavetronix Technical Support at 801-764-0277 for assistance.
Address Book
PLEASE NOTE – The Address Book is still under design. The documentation in this
section will need to be updated once the software is completed. For now this
explanation is just a placeholder.
The Address Book allows you to save device connection settings for future use.
Example
If you wanted to configure channels for a future installation, you could connect
using a virtual connection, create a virtual sensor file and then backup the
configuration settings that you created. After the file is successfully backed up,
the virtual sensor file will change to a sensor setup file and can be restored to
any sensor in the field.