User's Manual

6
SmartSensor Matrix Package
SmartSensor Matrix is the radar vehicle sensing device used in a Wavetronix Stop
Bar Detection System. The minimal stop bar detection system package contains
the following items:
 SmartSensor Matrix SS225 detector(s) with installed sensor back-plate
 Sensor Mounting Kit(s)
 Sensor Cable(s) and connectors(s)
 Pre-wired cabinet unit (PCU) with installed underground surge, termination
blocks, and DC surge option
 Detector Rack Card(s) with patch cable(s)
 SmartSensor Manager Matrix (SSMMTX) software
 SmartSensor Matrix User Guide
Standard packages are built and ready to order for 1, 2, 3 and 4 approach systems
with as many as eight sensors. Figure I-2 illustrates a 4-sensor system. Check the
packing slip for actual contents. If any of items are missing, note the serial
numbers located on the back of the sensors and contact your distributor.
Figure I-2: System Diagram of a 4-Sensor Wavetronix Stop Bar Detection System
Caution
Do not attempt to service or repair this unit. This unit does not contain any
components and/or parts serviceable in the field. Any attempt to open this unit,
except as expressly written and directed by Wavetronix, will void the customer
warranty. Wavetronix is not liable for any bodily harm or damage caused if service
is attempted or if the back cover of the SmartSensor unit is opened. Refer all
service questions to Wavetronix or an authorized distributor.