User's Manual

63
Sensor Settings
In this Chapter
 Sensor Settings
Click the Sensor Settings link on the main menu to change and save settings on the
sensor.
Figure 5.1 – Serial Settings Window (New Screenshot Needed)
The Sensor Settings window contacts the following fields (see Figure 5.1):
• Serial Number – Contains the sensor serial number and cannot be edited.
• Sensor ID – ID used to uniquely identify all sensors on a multi-drop bus. This
ID is based upon the last seven digits of the Serial Number and cannot be
edited.
• Description – Allows you to enter a description for each sensor. Limited to
32 characters.
• Location – Allows you to enter the intersection location of the sensor.
Limited to 32 characters.
• Approach – Allows you to enter the direction of traffic the sensor is
detecting (e.g. NB, SB, WE, WB). Limited to 32 characters.
• RF Channel – Displays which radio frequency channel the sensor is using.
There are eight RF channels available. Using multiple sensors in close
proximity will require each sensor to be set to a different RF channel (see
the introduction for more information about mounting sensors in close
proximity).
• Sensor Height – The height of the sensor in feet. This value impacts the
performance of the sensor.