User's Manual

69
• Adjust thresholds
To add a lane:
1. Click in the Edit Area in the vicinity of the lane.
2. Click on the Add Lane option. There are a maximum of ten lanes and lanes
cannot overlap. (You may be able to add an overlapping lane to the edit
area, but you will not be able to save it.)
Figure 6.5 – Edit Area Popup
To delete a lane:
1. Click in the Edit Area to select a lane.
2. Click on the selected lane to bring up the Edit Lane popup.
3. Click on the Delete Lane option of the Edit Lane popup.
Figure 6.6 – Edit Lane Popup
To insert a lane stop bar:
1. Click in the Edit Area to select a lane.
2. Click on the selected lane to bring up the Edit Lane popup.
3. Click on the Insert Stop Bar option of the Edit Lane popup.
To delete a lane stop bar:
1. Click in the Edit Area to select a lane.
2. Click on the stop bar within the selected lane.
3. Click on the Delete Stop Bar option of the Edit Stop Bar popup.
Note
Lanes have a direction shown by white arrows on top of the lane. The lane
direction is dictated by the order of the lane nodes. When a lane is first added
it will only have two nodes. To switch the lane direction, simply click on the
arrows. Before you save the configuration, check to make sure that all the
arrows are pointing in the correct direction.