User's Manual

75
Press the Place Auto Zones button if you would like to manually invoke this
automatic feature. Please not that this will move any zone adjustments that you
may have made before saving.
After the configuration is complete, click the Save Config button to save the
changes to the sensor. If you attempt to leave the Zones & Channels view before
saving your changes you will be presented with the following prompt (see Figure
6.20).
Figure 6.20 – Save Changes Dialog
Verification
After the configuration is complete, you will want to verify vehicle detections. To do
so click on the Step 3 tab. This will bring up the Verification View (see Figure 6.21).
Figure 6.21 – Verification View
In the Verification View, vehicle detections will appear as light blue objects. The
extent of these detections will vary based upon the length of the detected vehicle
and the length of queued traffic.