User's Manual

76
When detections are within a zone, they will cause the LEDs for the channels
mapped to that zone to activate. Active channels will appear red, and inactive
channels will appear gray (blank).
To see detections active the zones mapped to a particular channel, select that
channel by clicking on its LED. Active zones for the selected channel will appear
red, and inactive channels for the selected zone will appear black (blank).
As on the Edit Lanes & Stop Bar screen, you can use the menu bar to: save a
configuration, undo your last edit, edit thresholds, and pause/play traffic (see Figure
6.22).
Figure 6.22 – Verification View Menu Bar
Note
Only the zones for the selected channel will appear. If zones are not mapped
to any channel, they will not be seen in the Verification View.
Note
Vehicle detections in a stopped queue are represented by a continuous light
blue bar. This representation ensures that a zone will activate when queued
vehicles stop before and after the zone, but not directly over it. In addition, if
the first queued vehicle stops behind the stop bar and but is within 30 feet, the
displayed queue will be extended to the stop bar. This ensures that a stop bar
zone will activate when a vehicle stops near it in the corresponding lane.