User's Manual

84
Appendix
In this Appendix
 A – SmartSensor Matrix (SS225) Specifications
 B – Matrix Cable Connector Assembly Instructions
 C – Cable Lengths
 D – Click! 112/114 Reference Guide
Appendix A – SmartSensor Matrix (SS225) Specifications
Parameters
Specifications
Operating Frequency: 24.125 GHz (K-band)
Detection Zones:
Up to 8 zones
Detection Channels:
Up to 4 channels
Detection Range:
6 to 100 ft (1.83 m to 30.48 m)
Detection View:
90 degrees
Elevation Angle:
65 degrees
Measured Quantities:
Vehicle presence
Communications:
Two RS-485 half-duplex connections
Power:
10.0 watts @ 9-28 VDC
Physical Dimensions:
13.2 in x 10.6 in x 3.3 in (33.5 cm x 27 cm x 8.3 cm)
Zone Resolution:
1 foot (0.3 m)
Ambient Operating Temp:
-40 C to 70 C
Humidity:
Up to 95% RH
Shock:
10 g 10 ms half sine wave
Transmitted Power at 3m:
<100 dBUv/m @24.125 GHz
Appendix B – Matrix Cable Connector Assembly Information
The connector end of the SmartSensor Matrix cable mates to the eight socket
connector on the sensor as shown in Figure B.1. Socket A is near the connector’s
key. Figure B.2 details the pinout of the cable connector and the corresponding wire
in the cable. The SmartSensor Matrix cable has 7 wires. Internal to the sensor
another pair of wires connect to the protective earth lug.