User's Manual

In this chapter
 Installing SSMM
 Microsoft .NET Framework
4
e SmartSensor Manager Matrix (SSMM) software enables you to congure and interact
with the SmartSensor Matrix. SSMM can be run on a Windows® PC and on a Socket
Mobile 650 handheld computer.
e software can be downloaded on other computers by going to www.wavetronix.com.
is chapter explains how to download and install the SSMM software.
Using the Click 421
e Click 421 converts wired or wireless serial data to RS-485 communication and sends
it to all devices on a shared multi-drop communication bus on the backplate. is allows
control of all SmartSensor Matrix units from a single access point.
You can make a wired connection using a USB-to-serial converter and a USB adapter
cable; alternatively, you can make a wireless connection using a precongured Bluetooth
link. A whip antenna can be attached to the Click 421 to increase the distance and reli-
ability of the wireless link.
Follow the steps below to use the Click 421 to communicate with the SmartSensor Matrix:
1 Rock the Click 421 device onto the green T-bus to the left of the gray T-bus connector
on the second DIN rail on the backplate.
Installing SmartSensor
Manager Matrix 4