User's Manual

48 CHAPTER 4  INSTALLING SMARTSENSOR MANAGER MATRIX
the SSMM software. A PDF reader program (i.e. Adobe Acrobat Reader) is required
to view the release notes.
8 Click Finish to complete the setup process.
Note
SSMM is designed for the 96 DPI display setting. The application may not display text
properly, and may not function properly in general, if the display is not set to 96 DPI.
Installing SSMM on a Handheld Computer
SSMM can also be installed and on a handheld computer. Use these steps to install SSMM
on a handheld computer running Windows Mobile:
1 Ensure the handheld computer is connected to the PC and synced.
2 Click on the SSMM Setup.exe le to run the setup program on the host computer.
e SSMM Setup Wizard will automatically check the host computer to see if Mi-
crosoft ActiveSync is installed (ActiveSync is a program that is used to communicate
with a handheld device). If the ActiveSync program is found, the option of installing
SSMM to a handheld device will become available.
3 Click the Pocket PC checkbox and then the Next>> button to install SSMM on a
connected handheld device (see Figure 4.5). If both the Computer and Pocket PC
boxes are checked, the setup program will rst install the SSMM software to the PC.
Figure 4.4 – Destination Selection
4 Click Continue>> to start the handheld computer installation process. e setup pro-
gram runs the Add/Remove Programs application for Windows handheld devices. If
a handheld device is connected to the computer, Add/Remove Programs will immedi-
ately begin installing SSMM on the handheld device. If a handheld device is not con-
nected to the computer, SSMM will be downloaded the next time a handheld device
is connected to the computer.