User's Manual

8 Wavion Networks

Chapter 3

Package Content

Check that the package contains:

• Injector Unit with a wall mounting kit

• Outdoor Unit with a connection to an external antennas

• 6 antennas

• Pole mounting kit for the Outdoor Unit

• This Quick Installation Guide

Additional Equipment and Tools required for Installation

• Ethernet cable (straight for connecting to a hub/switch)

• Crimping tool for RJ-45 connectors.

• Ground cable with an appropriate termination.

• Mains plug adapter or termination plug (if the power plug on the supplied AC

power cord does not fit local power outlets).

• Portable PC with Ethernet card and Telnet software and a straight Ethernet

cable.

• I

ation tools and materials, including appropriate means (e.g. a pole) for installing

the outdoor equipment.

• 1/4-inch flat blade screwdriver

WARNING: Use straight Ethernet (POE) cable

connecting the injector to AF unit in order to have

all the features work properly (reset button and

Link LED). Using cross cable might cause turn

Link led to “ON” permanently and also may be the

cause software reset.

DATA cable connecting the injector to the network

can be cross cable as well.

WARNING:

ONLY experienced installation

professionals who are familiar with local building

and safety codes and, wherever applicable, are

licensed by the appropriate government

regulatory authorities should install outdoor units

and antennas. Failure to do so may void the

WBS-2400/5800 product warranty and may

expose the end user or Service Provider to legal

and financial liabilities. Wavion and its resellers

or distributors are not liable for injury, damage

or regulation violations associated with the

installation of Outdoor Units or antennas.