User's Manual

14 Wavion Networks
Mounting Strategies
Consider the available mounting structures and antenna clearance when choosing a
mounting location. Wavion outdoor unit WBS-2400/5800 Sector should be mounted on
horizontal pole only the antennas pointing vertically and clear of obstruction.
It is recommended to attach ground and data cables to the WBS-2400/5800 Sector prior
to mounting. Before mounting the WBS-2400/5800 Sector, read the wiring instructions in
Grounding the Wavion WBS-2400/5800 and Connecting Power and Data.
Note : The WBS-2400/5800 should be mounted with at least 4 ft/3 Meter of
clearance around the antennas to eliminate potential interference from the
mounting structure.
Figure 4.1 Pole mounting kit for the Outdoor Unit & Sealing kit
Using Hose Clamps
Special hose clamps that include threaded holes are used by the mounting assembly to
secure the WBS-2400/5800 Sector to the mounting structure. Figure 4.2 demonstrate
how to correctly use the hose clamps. The bands must be threaded through holes in the
pole bracket, and then attached horizontal pole and tightened.
There are two pairs of threaded holes on the back of the unit, enabling to use the special
clamps for mounting the unit on diverse pole diameters.