User's Manual

Installation Guide 13
Mounting Strategies
Consider the available mounting structures and antenna clearance when choosing a
mounting location. Wavion outdoor unit WBS-700 should always be mounted with the top
of the unit parallel to the ground, and with the antennas pointing upward and clear of
obstruction.
It is recommended to attach ground and data cables to the WBS-700 prior to mounting.
Before mounting the WBS-700, read the wiring instructions in
Grounding the Wavion
WBS-700 and Connecting Power and Data.
Note: The WBS-700 should be mounted with at least 4 ft/3 Meter of clearance
around the antennas to eliminate potential interference from the mounting
structure.
Figure 4.1 Pole mounting kit for the Outdoor Unit & Sealing kit
Using Hose Clamps
Special hose clamps that include threaded holes are used by the mounting assembly to
secure the WBS-700 to the mounting structure.
Figure 4.2 demonstrate how to correctly
use the hose clamps. The bands must be threaded through holes in the post clamp, and
then attached to either a vertical or a horizontal pole and tightened.