User's Manual

18 Wavion Networks
6. Use a torque wrench click type or digital set to 10 ft-lb, put a layer of loctite 242
type on the screws surface and torque all 4 screws. Re- torque to 15 ft-lb
Figure 4.6 Use a torque wrench click
Note: The WBS-700 unit must be parallel to the ground. The unit can be
rotated to obtain the correct position.
Note Installations on large wooden poles require band clamps such as
those supplied by Panduit, www.panduit.com. Such a product is listed as
"Metal, Locking Tie Extra Heavy Duty 304 Stainless Steel". The tie and
the installation tool are shown below