User's Manual

20 Wavion Networks
2. Connect the other end of the grounding cable to a good ground (earth)
connection. (For example, a grounding rod).
Figure 4.8 Grounding
Grounding the Data Protection Device
The grounding method for an indoor data protection device is shown in Figure 4.9.
To ground an indoor data protection device:
1. Position the protection device as close to the building entrance as possible.
2. Attach a length of #10 AWG bare copper wires to the ground post on the data
protection device.
3. Attach the other end of the grounding wire to the ground connection of an
electrical outlet or a grounded water pipe.
Figure 4.9 Grounding indoor injector by Network Protection Unit