User's Manual

Package Content
Installation Guide 7
Chapter 3
Package Content
Check that the package contains:
Qty Description
1 WBS-700 outdoor unit with connections to external antennas
6 N-type to N-type RF cables
6 Antennas
2 CLAMPS 46-125 X 14 MM STST
1 POST CLAMP
1 Safety cable
1 POE injector unit with wall mounting kit
1 AC PLUG, US
24 Screws 10-32 X 1/2" SOCKET CAP SCREW
24 Lock Washers
24 FLAT Washers
1 LN tool , 4mm Allen wrench
Sealing tape SCOTCH 130C
Additional Equipment and Tools required for Installation
 Ethernet cable (straight for connecting to a hub/switch)
 Crimping tool for RJ-45 connectors.
 Ground cable with an appropriate termination.
 Mains plug adapter or termination plug (if the power plug on the supplied AC
power cord does not fit local power outlets).
 Portable PC with Ethernet card and Telnet software and a straight Ethernet
cable.
WARNING: Use straight Ethernet (POE) cable connecting the injector to WBS-700 in order to have
all the features work properly (reset button and Link LED). Using cross cable might cause turn
Link led to “ON” permanently and also may be the cause software reset. DATA cable connecting
the injector to the network can be cross cable as well.