User's Manual
Table Of Contents
- Contents
- Wind Loading Considerations
- Connecting Power and DATA
- Management IP address
- Management VLAN
- Virtual AP (VAP)
- To define a VAP:
- To view the status of a VAP:
- Authentication Combinations
- Encryption Methods
- Radio configuration (basic)
- VLAN configuration
- QoS (Quality of Service) Packet Priority
- Wireless Associations
- ACS (online, Offline)
- Accessing Automatic Channel Selection
WBSn-2400 Quick Start Guide Page 10
POE port RJ45 Pin Descriptions
Pin
Signal
Color
Description
1 BI_DA+ Orange-White Bi-directional pair A +, POE GND
2 BI_DA- Orange Bi-directional pair A -, POE GND
3 BI_DB+ Green-White Bi-directional pair B +, POE +55V
4 BI_DC+ Blue Bi-directional pair C +, POE +55V
5 BI_DC- Blue-White Bi-directional pair C -, POE +55V
6 BI_DB- Green Bi-directional pair B -, POE +55V
7 BI_DD+ Brown-White Bi-directional pair D +, POE GND
8 BI_DD- Brown Bi-directional pair D -, POE GND
Accessing the Wavion Management Interface
The following procedure describes how to log in to the WBSn-2400 Wavion Management Interface, enter the
Set-up Wizard, and access further configuration information.
1. In an internet browser, enter the Management IP address of the WBS unit in the URL navigation field.
The default IP address of the unit is IP: 192.168.1.1 and the default mask is: 255.255.255.0.
Note: Currently, both
Microsoft Internet Explorer
and
Mozilla Firefox
browsers are supported.
2. A log-in screen is displayed.
a. Enter admin in the User Name field.
b. Enter admin in the password field.
c. Specify the language in which you wish to work. (Note: This field will be functional in a future
release.)
d. Click Connect. The Wavion EMS screen is displayed.
3. Select the Setup Wizard option.
4. The Installation screen is displayed. Click the arrow in the bottom left corner of the screen to proceed to
the Network Configuration screen.
5. Complete the parameters, to set up your initial networking configuration.
Note: Further configuration parameters are available, and should be specified in order to complete your
set-up. For more information, see Further Configuration Features.
Parameter
Description and value
Network mode Bridge
IP address The current IP address of the unit
Mask The current subnet mask used to establish the broadcast domain. The default mask of
the unit is 255.255.255.0.
Gateway The current IP address of the default gateway.
Client Protocol Select DNS or DHCP
SSID Name The full SSID string
Security Specify the required Wi-Fi security protocol
Password Specify a unique password for the Wi-Fi security