User's Manual
Table Of Contents
- Contents
- Wind Loading Considerations
- Connecting Power and DATA
- Management IP address
- Management VLAN
- Virtual AP (VAP)
- To define a VAP:
- To view the status of a VAP:
- Authentication Combinations
- Encryption Methods
- Radio configuration (basic)
- VLAN configuration
- QoS (Quality of Service) Packet Priority
- Wireless Associations
- ACS (online, Offline)
- Accessing Automatic Channel Selection
WBSn-2400 Quick Start Guide Page 11
Automatic Channel Selection screen
The Automatic Channel Selection utilizes an embedded algorithm to scan for the best channel with which
your base station can work, ensuring optimal capacity, minimal interference and maximum performance.
1. Click Press to start ACS scan. The scan begins, and a progress indicator is displayed, showing the
percentage of completion.
2. When the scan is complete, (after approximately five seconds), the button label changes to ACS done.
3. The ACS results are presented on the screen, showing a bar graph with the quality of each channel
presented by the height of the bar.
4. Click Exit to exit the Setup Wizard.
Further Configuration Features
IP Management
In the EMS application, use the System page to set up, configure and manage your IP. This page displays
basic static information on the system, including contact details, and IP addresses. Default values and details
are provided, which should be modified, by specifying parameter values according to your network system
and requirements.