User Manual
Table Of Contents
- 1. Introduction
- 2. Installation
- 3. Defining and Managing WBSn
- 5. Appendix a: Troubleshooting
- 6. Appendix B: Frequently Asked Questions
- 7. Appendix C: Hardware Specification
- 8. Glossary
WBSn-2450 User Guide Page - 29 -
4. Administration
The Administration section enables you to manage your system, troubleshoot, and specify various
administration parameters.
4.1.1 Management
In the Management section, you can configure your FTP server address and password, as well as
completely rebooting your system.
To reboot the system
1. Navigate to Administration => Management => Reboot.
2. Click Reboot, to reboot your entire system.
Note: When performing a firmware upgrade, the system is automatically rebooted. For more
information, see Firmware
.
To configure the FTP Client
1. Navigate to Administration => Management => FTP Client.
2. Specify the parameters as described in the following table.
Parameter Description and values
Server IP The FTP Server IP address
Anonymous Login Specify whether anonymous login is enabled or disabled
FTP User Specify the FTP user to be used during login
FTP Password Specify the password for the FTP user
3. Note: When performing a firmware upgrade using FTP protocol, the FTP Server address is displayed
in the Firmware screen. Any change made to the server address in that screen, is automatically
reflected in the FTP Client screen, and vice versa. For more information, see Firmware
.