User Manual

WBSn-2450 User Guide Page - 34 -
4.1.5 Configuration files
You can use this section to restore your configuration to the factory default settings.
To restore factory default configuration
1. Navigate to Administration => Configuration Files.
2. Click the Configuration Files button to automatically back up your configuration file, and set the
configuration back to the factory default.
To backup and restore configuration
1. Navigate to Administration => Configuration Files => Backup and Restore.
2. Click Backup to automatically backup your configuration file.
The saved_config.xml.bak file, and its creation date and time are displayed.
3. Click Restore to start the restore process from a previously saved configuration backup file.
Note: This is relevant only when a backup was previously created, and performs a reboot of system.
To import and export configuration file
1. Navigate to Administration => Configuration Files => Import and Export.
2. Click Export to locally save your configuration file.
3. Navigate to the required location, modifying the file name if required, and click Save.
4. Click Browse to navigate to the previous saved file.
5. Select the file, and click Open.
6. Click Import to start a system reboot using the configuration definitions of this configuration file.
4.1.6 Log
Navigate to Administration => Log to view and configure logs of system events.
• The syslog is a way to send the events to a syslog server that keeps them
• The SNMP traps section displays SNMP protocol configuration and severity, and enables you to set a
specific event to a customer severity, regardless of the configured factory default severity.
• The Event log displays the systems most recent events.