Owner's Manual

Introduction
Welcome to Wāvtech, exceptional mobile audio integration products
for audiophiles. Our products are engineered to provide a truly
remarkable listening experience. Built for the professional installer,
our OEM integration and signal processor models are simply the best
solution available for unlimited sound system upgrades while
retaining the factory receiver.
Features
Ÿ 2-Channel Line Output Converter or Line Driver
Ÿ Parametric Bass EQ
Ÿ Remote Level Control Ready
Ÿ Differential Balanced Inputs
Ÿ Low Impedance Outputs
Ÿ Variable Gain Adjustment w/Clip LED
Ÿ Selectable DC-Offset and/or Audio Detect Auto Turn-On
Ÿ Generated +12V Remote Output
Ÿ OEM Load Detect Compatible
Ÿ Locking Detachable Power/Speaker Terminals
Ÿ Panel Mount RCA Jacks
Ÿ Compact Aluminum Chassis w/Detachable Mounting Tabs
ΠPower Indicator: This red LED indicates when the linkDQ is
powered on. Once illuminated, there will be a short delay before
audio signal output is enabled. During initial power connections,
the LED may illuminate for a brief period.
 Auto Turn-On Detect Jumpers: By default, the linkDQ is set to
detect both DC-offset and audio signal for turning itself on/off
automatically. These jumpers allow either mode to be
independently defeated for cases where only one turn-on mode is
preferred or to bypass both modes when a switched +12V trigger is
available and connected to the REM IN terminal.
Ž Power Supply Terminal: For +12V battery, chassis ground, remote
in and remote output wire connections. A minimum of 18AWG wire
is recommended for power and ground connections. Always protect
the +12V power wire with a 1-amp fuse.
Connections & Functions
3
Œ

Ž 

‘ ’
“