Owner's Manual

Specifications
<10Hz to >70kHz
<10Hz to >100kHz
180Ω / 20kΩ
20kΩ
2-20Vrms / 4-40Vrms
0.5-5Vrms
Spk Input 40Vrms
Output Impedance <50Ω
Max Output Voltage >10Vrms
<0.04%
<0.04%
at 1V output >96dBA
at 4V output >107dBA
at 10V output >115dBA
Boost 0dB to +12dB
Frequency (Fc) 30Hz - 80Hz
Width (Q), avg. wide to narrow
2 to 5
Remote via REM IN >10.5V
DC-offset
via Spk Input
>1.3V
via Spk Input
<100mV
via RCA Input <10mV
Turn-off Delay
up to 60sec
>500mA
Within 3% of B+
<270mA
<1.8mA
10.5V-18V
<8.5V
1.14”x2.95”x3.52”
28.9x74.9x89.5mm
Product Dimensions
Chassis (not incl. terminals/jacks)
Power Off (B+)
Max Draw (w/o REM OUT)
Sleep Current
Power On (B+)
Max Flat (+0/-1dB)
Extended (+0/-3dB)
Spk Input
RCA Input
Spk Input (max-min gain)
RCA Input (max-min gain)
Current Draw
Operating Voltage
Turn-On Trigger
Spk Input
S/N
Remote Output
at 1% THD+N
Spk Input at 10V output
RCA Input at 10V output
Current Capacity
Voltage
Input Impedance
Input Sensitivity
Max Input Voltage
THD+N
Frequency Response
peak, <5sec cont.
8
Parametric EQ
Remote Level Control Volume Range 0dB to -30dB
Notes:
Ÿ Spk input sensitivity range is selectable per channel via internal jumpers (20V/40V)
Ÿ Spk input loading is defeatable per channel via internal jumpers (LOAD)
Ÿ DC-offset and/or audio detect are defeatable via external jumpers (DC, AUD)
Ÿ Remote level controller (linkRC) is sold separately
Ÿ All specifications are subject to change without notice
at 1V output >97dBA
at 4V output >108dBA
at 10V output >116dBA
RCA Input
Audio
Signal