User's Manual Part 2

2 If a cellular (CEL) call comes in, use a cordless handset and

press CEL to answer it.

Remember that the corded handset and the speakerphone on the

base cannot be used at the same time.

Call waiting with two calls

1 While a call is in progress (as in the above example) and the

landline (TEL) receives another call,

Call waiting appears in

the display and any other cordless handsets not in use will

ring.

2 To answer the call, press

FLASH/DEL on the base, or TEL on any

handset not in use.

If the new call comes in on a different line, press the

appropriate key (CEL or TEL) regardless of whether you are

using the base or a handset.

•Barge-in

After placing a landline (TEL) call with a cordless handset, this

feature allows up to three other registered cordless handsets to

join the call. Before using the Barge-In feature, read the following

information.

• The D-Mode CT comes with the Barge-In feature set to off–it

must be activated before use.

• If power to the base is interrupted, Barge-In must be

reactivated.

• The first cordless handset to place the call is the “master” and

fully controls the call. Other registered handsets that join the

call are “slaves” and can only join or exit the call.

• Barge-In works only for cordless handsets during a landline

(TEL) call and is not operable on the base.

Note: Remember that with Barge-In activated, privacy may be

compromised. Any registered handset can join the call, but

there is no indication that another handset joined the call.

d mode ct draft 6.book Page 31 Wednesday, March 2, 2005 10:33 PM