User's Manual Part 2

D Mode CT DRAFT 6 23 Copyright © 2005 Waxess
Recipient No.? appears.
3 Enter the phone number of the recipient and press
OK.
To send a message to a number that is stored in the phone
book, press
MENU, scroll to the entry you want, and press
Select.
Note: Verify that the CEL line is not in use before sending the
message.
A confirmation message appears. Then, the SMS menu
appears. If you want to save the message.
4 Scroll to Save, press Select, then press
Yes.
The message is stored in Saved messages for easy viewing
later.
OR
Press
No to exit.
SAVE A NEW MESSAGE
1 After writing a message, press OK.
2 Scroll to Save, and press
Select.
The message is stored in Saved messages for easy viewing
later. Then the SMS menu appears again.
VIEW SAVED MESSAGES
1 Press MENU, scroll to Messages, and press Select.
2 Scroll to
SMS, and press Select.
3 Scroll to
Saved, and press Select.
4 Scroll to the message you want to read, and press
Select.
RECEIVE A MESSAGE
When the D Mode CT receives a text message, it sounds the ring
tone for an incoming CEL call. The message goes to the Inbox.
CHECK THE INBOX FOR READ AND UNREAD (NEW) MESSAGES
1 Press MENU, scroll to Messages, and press Select.
2 Scroll to
SMS, and press Select.
3 Scroll to
Inbox, and press Select.
4 Scroll to
UnRead Messages, and press Select.
If you have no unread messages, an error tone sounds.
OR
5 Scroll to
Read messages, and press Select.
d mode ct draft 6.book Page 23 Wednesday, March 2, 2005 10:33 PM