User's Manual Part 2

Press FLASH/DEL to answer the new call.

Press

FLASH/DEL again to return to the

first call.

If the current call is on the CEL line and

another call arrives also on the CEL line,

a “C” blinks in the display.

If the current call is on a CEL line and the new call is on the TEL

line, the “C” remains solid, and the “T” indicator blinks.

If you receive a call waiting signal during the conference call,

press

FLASH to answer the call.

Check the log

Press  to scroll through the log from newest to oldest. Press 

to scroll through the log from oldest to newest. The log holds up

to 50 entries.

Dial a number

1 Scroll to a name/number displayed, and press Select twice.

The number appears in the display.

If the number’s area code is the same as an area code stored

in the phone memory (see “Area codes” on page 10), the area

code may not appear. If the area code is required for dialing,

press # to add the area code to the number. If the number 1

is also required for dialing, press

* to add 1 to the beginning

of the number.

2 Press

CEL or TEL to make the call.

Save a number

1 Scroll to a name/number displayed, and press Select.

2 Scroll to Save, and press Select.

3 Enter a name if needed (see “Enter names and characters” on

page 18) and press

OK.

4 Edit the number if needed and press

OK.

The

Distinctive Ring menu appears.

5 Scroll to the setting you want and press

OK.

The

Speed Dial menu appears.

New call

d mode ct draft 6.book Page 27 Wednesday, March 2, 2005 10:33 PM