Instructions / Assembly

Watch and Assemble www.waybasics.com/help-triple-cube-plus Help and Comments www.waybasics.com/contact Share and Win www.waybasics.com/share
Important
Tip Start assembly from bottom to top.
DO NOT place unit on its side or back as
it will compromise its structural integrity.
THIS SIDE UP
1 2
5 6
Carefully remove the
3M protective layer from
adhesive.
Place alignment pins
in vertical zBoards.
Align vertical zBoards
and backer board to
horizontal zBoard.
Align middle zBoard.
3 Align vertical zBoards and
backer board to horizontal
zBoard.
4 Align middle zBoard.
7 Align vertical zBoards
and backer board to
horizontal zBoard.
8 Align horizontal zBoard. Visit
links below for more details.
Enjoy building possibilities!
3 Backer Boards
thin and has no adhesive
2 Horizontal zBoards
with grooves
6 Vertical zBoards
adhesive strips on 2 edges
24 Pins
2 Middle zBoards
with grooves on 2 sides
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
Included
TRIPLE CUBE PLUS
• Assemble your unit on a flat even surface, carpet not recommended
• Furniture is for indoor use only
• When moving your Way Basics furniture, lift from the bottom
• Make sure zBoard surfaces are clean and dry