Instructions / Assembly

Get Started
Thank You
Inside Your
Package
Before You
Begin
Right Side
Up
• Assemble your unit on a flat even surface, carpet
• Furniture is for indoor use only
not recommended
• When moving your Way Basics furniture, lift
• Make sure zBoard surfaces are clean and dry
from the bottom
Tip: Make sure only one zBoard touches the floor to
confirm correct usage.
When placed on side or back, vertical strength is
compromised.
THIS SIDE UP
Horizontal zBoards
Vertical zBoards Backer Board Pins
adhesive strip on 1 edge adhesive strip on 3 edges thin and has no adhesive
Correct
Incorrect Incorrect
ON SIDE ON BACK
Share a photo on our wall! www.facebook.com/waybasics
Thank you for choosing Way Basics! With your help, Way Basics furniture is helping protect the environment. No new
trees were cut down to create our furniture, because it’s made from recycled paper. At the end of its long life we hope
you’ll find other uses for our zBoards or simply recycle – then they might eventually find their way back to Way Basics
where we’ll make them into new zBoards!
1 shelf products
2 shelf products
3 shelf products
tribeca
8 pins
16 pins
24 pins
36 pins