Instructions / Assembly

Watch and Assemble www.waybasics.com/help-double-cube-plus Help and Comments www.waybasics.com/contact Share and Win www.waybasics.com/share
Important
Tip Start assembly from bottom to top.
DO NOT place unit on its side or back as
it will compromise its structural integrity.
THIS SIDE UP
21 3 4
6
7 8
Carefully remove the 3M
protective layer from adhesive.
Place alignment pins
in vertical zBoards.
Align middle zBoard
(groove on 2 sides).
Repeat steps 1 - 5 for next tier.
Align horizontal zBoard and
press firmly to secure unit
together. Visit links below
for more details.
Enjoy building possibilities!
Fit backboard into horizontal
zBoard groove.
Arrange vertical zBoard with
grooves facing backboard
as shown.
5
Align vertical zBoard
to backboard.
2 Backer Boards
thin and has no adhesive
2 Horizontal zBoards
with groove on 1 side
4 Vertical zBoards
adhesive strips on 2 edges
16 Pins
1 Middle zBoard
with grooves on 2 sides
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
Included
DOUBLE CUBE PLUS
• Assemble your unit on a flat even surface, carpet not recommended
• Furniture is for indoor use only
• When moving your Way Basics furniture, lift from the bottom
• Make sure zBoard surfaces are clean and dry