Instructions / Assembly

Watch and Assemble www.waybasics.com/help-shelf-cube Help and Comments www.waybasics.com/contact Share and Win www.waybasics.com/share

Important

DO NOT place unit on its side or back as

it will compromise its structural integrity.

THIS SIDE UP

WARNING: CHOCKING HAZARD

Small parts NOT for children under 3 years

1 2 3

4 5 6

Carefully remove the 3M

protective layer from adhesive.

Place alignment pins in middle

zBoard and vertical zBoards.

Align vertical zBoards to middle zBoard.

Align a horizontal zBoard and

slide in backer board.

Align horizontal zBoard and

press ﬁrmly to secure unit

together.

Join other connect cubes with connector

pins! Visit links below for more details.

Enjoy building possibilities!

Note Use included decals to cover the

connector holes if not stacking cubes.

1 Backer Board

thin and has no adhesive

2 Horizontal zBoards

with grooves

1 Middle zBoard

adhesive strips on 2 edges

2 Vertical zBoards

adhesive strips on 2 edges

12 Alignment Pins

4 connectors pins

Included

CONNECT SHELF CUBE

• Assemble your unit on a ﬂat even surface, carpet not recommended

• Furniture is for indoor use only

• When moving your Way Basics furniture, lift from the bottom

• Make sure zBoard surfaces are clean and dry