Instructions / Assembly

Important
THIS SIDE UP
7 8
Align top horizontal zBoard to unit
and press down firmly.
Enjoy building possibilities!
21 3 4
6
Carefully remove the 3M
protective layer from adhesive
(adhesive shown in yellow).
Align middle horizontal zBoard
(has grooves on top and
bottom) and press down firmly.
Place alignment pins
in vertical zBoards.
Align vertical middle
zBoard to horizontal zBoard
and press down firmly.
Insert backboards into
grooves.
Align vertical middle
zBoard to horizontal zBoard
and press down firmly.
Insert backboards into
grooves.
Align vertical side zBoards with
grooves facing the backboard.
Align vertical side zBoards
with grooves facing the
backboard.
5
4 Vertical Side zBoards
groove on 1 side
24 Pins
2 Vertical Middle zBoards
groove on 2 sides
4 Backboards
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
1 Top zBoard, 1 Bottom zBoard
Groove on 1 side
1 Middle zBoard
Groove on 2 sides
Included
4 CUBBY
Help and Comments www.waybasics.com/contact
version 042017
• Assemble your unit on a flat even surface
• Make sure zBoard surfaces are clean and dry
• When moving your Way Basics unit, lift from the bottom
• Indoor use only. Not in bathroom.
CAUTION placing unit on its side or back
will compromise structural integrity. Use
right side up.