Use And Care Manual

PURE WATER TECHNOLOGIES, LLC | dba Wayde King Water Filtration™ www.KingWaterFiltration.com |
5502 S. Fort Apache Rd. Suite # 100, Las Vegas, NV 89148 | Customer Service Ph: 855.957.2166 | customerservice@kingwaterfiltration.com
8
TIPS TO AVOID ACCIDENTAL
PROPERTY DAMAGE
INSTALLING A LEAK DETECTOR VALVE
Wayde King Water Filtration Whole Home
Filtration and Conditioning Systems use the
latest technologies available to ensure and
prevent water rupture. However, if manufacturing
guidelines are not followed, water damage can
occur. Causes of flooding include excessive
water pressure, spikes in water pressure, human
tampering, and negligent installation.
To eliminate possible water and property
damage, use the following preventative steps
and devices:
A licensed plumber should install this unit,
reading and following the Installation and
Operation Guide as well as all notices.
Install a water pressure regulator/control valve
inline to keep the water inflow pressure at 60
psi or less.
Keep the water supply line from the extreme
heat or freezing. Temperature at unit location
should be maintained between 35° F and 120°
F.
Install an inline flood prevention valve/leak
control instructions at right.
In addition to having all other safety devices,
use a ball valve to bypass the inflow of water to
the system during vacation.
Leak Controllers are specialized water alarm and shut-off systems
that use sensors to detect a water leak. The sensor sounds an
alarm and then shuts off your water. The alarm continues to sound
until the valve is manually reset. By preventing continuous water
flow, mold and property damage are restricted.
Features
1” full port ball valve with auto shut-off
Programmable service reminder indicator
Water detection sensitivity down to 2ppm TDS (total dissolved
solids)
4 AA alkaline batteries
Automatic daily valve management
Available port sizes (inlet/outlet) ¾”, 1”, 1-¼” and 1-½”
1. Install leak detector valve into an inlet water line.
2. Move sensor as close to filter as possible. Upon sensing
moisture, controller will engage the shutoff valve and sound
an alarm.
3. Secure controller module to the wall.