Use and Care Manual

PURE WATER TECHNOLOGIES, LLC | dba Wayde King Water Filtration™ www.KingWaterFiltration.com |
5502 S. Fort Apache Rd. Suite # 100, Las Vegas, NV 89148 | Customer Service Ph: 855.957.2166 | [e-mail]
1
IMPORTANT INFORMATION
• Do not run ½" inside diameter (ID) semi-rigid drain tube more than 20 running feet. If over 20 running feet,
increase drain line tubing size to 3/4" ID for the entire length of tube.
• Have control valve set correctly for your specific water needs.
• If more than one unit is being installed, the regeneration/backwash times should be staggered.
• A pressure regulator, such as a slow-flow regulator, must be installed in front of the unit's water inlet if the water
pressure (including any possible pressure spikes) could exceed 60 psi. The most common operating water
pressure range is 35-65 psi. Failure to comply will void the warranty. Wayde King Water Filtration
TM
assumes no
liability for damage caused by excessive water pressure.
• Check all the connections (i.e., water hose/tubing, connectors/fittings) to ensure proper connection and to avoid
leaks.
• After prolonged periods of non-use (such as during a vacation), it is recommended that the system be flushed
thoroughly. Let water run for 10-20 minutes before using.
• Check plumbing inlet and outlet to ensure the proper flow of water through the system.
• Plug system into a 110-volt outlet which contains a fuse or circuit breaker of 20 amps.
• Locate the system near a cold water supply line. Do not set the system farther than 15 ft. from the cold water line.
• Do not use the system on cold water supply line with less than 20 psi.
• Do not use the system where water is microbiologically unsafe or with water of unknown quality.
• All water treatment installations must conform to local plumbing, electrical and sanitation codes. These codes are
established for your protection. Check with your local public works department for current plumbing codes.
• Installation errors can cause property damage. Wayde King Water Filtration™ assumes no liability whatsoever for
systems improperly installed or those installed by someone other than a licensed plumber or qualified contractor.
• The contaminants or other substances removed or reduced by the selected filtration system(s) are not necessarily
in your water. Ask your local water municipality for a copy of their water analysis, or have your water tested by a
reputable water lab.
• The Wayde King municipal filtration system not only removes harmful contaminants but will also reduce harmful
scale buildup, extend the life of your plumbing and appliances, and, most importantly, provide pure alkaline quality
drinking water for the needs of you and your family from every faucet in your home.
Installation must be made within an area protected from the elements and freezing. The unit must be
protected from rain, dust, flooding, snow, freezing, and direct sunlight (the system's exposure to direct
sunlight may cause algae growth). Failure to comply will void the warranty.