Use and Care Manual

PURE WATER TECHNOLOGIES, LLC | dba Wayde King Water Filtration™ www.KingWaterFiltration.com |
5502 S. Fort Apache Rd. Suite # 100, Las Vegas, NV 89148 | Customer Service Ph: 855.957.2166 | [e-mail]
2
SAFETY PRECAUTION
Read all instructions, specifications, cautions, and warnings before installing and using your water filter system. Learn the
specific details regarding installation and use. Failure to follow them could cause serious property damage.
Installation errors can cause property damage. All equipment needs to be plumbed into the water system by a
licensed plumber.
These guidelines must be followed during system installation:
• Use the system on a potable, safe-to-drink, COLD water supply only. Do not use on hot water line.
• The system is for indoor use only.
• Turn the cold water line off while installing the system.
• When installation is completed, re-check the system to ensure there are no leaks or drips.
• The outlet must be within reach of the power cord. Do not use an extension cord. Extension cords that are too
long or too light do not deliver sufficient voltage to the unit and could present a safety hazard.
• The rubber 0-ring provides a watertight seal between the cap and the bottom of the housing. Make sure the 0-ring
is properly seated in the groove below the threads of the housing or a water leak could occur.
• Do not cross-thread fittings or housings. If cross-threaded, place the unit out of service.