Assembly

ManualsBrandsWayfair Custom Upholstery ManualsBedsEmilia Upholstered Low Profile Standard Bed

components

(H7) x 6

1” x 5/16” bolt

king bed frame assembly

(H5) x 6

1” x 1/4” bolt

(H1) x 14

1/4” bolt

(H4) x 4

3/4” washer

larger hole

(H3) x 4

3/4” x 5/16” bolt

(H2) x 14

1/4” nut

(H6) x 6

3/4” washer

smaller hole

(H8) x 6

1 1/4” washer

(H12) x 8

3/4” screw

optional

(H13) x 2

L bracket

optional

(H10) x 1

Larger L wrench

(H9) x 1

Smaller L wrench

(H11) x 1

Wrench

hardware

Please note: you will need a at head and phillips head screwdriver to assemble your bed frame.

item description qty

A Metal corners 4

B Metal side rail 2

C Metal end rail 2

D Corner leg 4

item description qty

E Center support rail 3

F Center support leg 6

G Upholstered side rail 2

H Upholstered foot rail 1

Summary of content (4 pages)

PAGE 1
king bed frame assembly components item description A Metal corners B qty item description qty 4 E Center support rail 3 Metal side rail 2 F Center support leg 6 C Metal end rail 2 G Upholstered side rail 2 D Corner leg 4 H Upholstered foot rail 1 C E B A G D F H hardware (H1) x 14 1/4” bolt (H7) x 6 1” x 5/16” bolt (H2) x 14 1/4” nut (H8) x 6 1 1/4” washer (H3) x 4 3/4” x 5/16” bolt (H9) x 1 Smaller L wrench (H4) x 4 3/4” washer larger hole (H10) x 1 Larger L w
PAGE 2
king bed frame assembly step 1 - building the metal bed frame 1.1 Place (A) metal corners in a rectangular shape roughly the size of your mattress. 1.2 Lay (B) and (C) metal rails into (A) metal corners to create the shape of your bed frame. Snap into place. 1.3 Secure (B, C) metal rails to (A) metal corners using (H1) bolts and (H2) nuts. Tighten using (H9) L wrench and (H11) wrench. Please note: (H2) nuts should be on the inside of the frame. 1.
PAGE 3
king bed frame assembly step 2 - center support system B E 2.1 Align holes of (E) center support rail with holes on (B) metal side rails. Attach using (H1) bolts and (H2) nut. Tighten using (H9, H11) wrenches. Please note: (E) center support rail attaches underneath (B) metal side rails. 2.2 Attach (F) center support legs to (E) center support rail using (H5) bolts and (H6) washer. Tighten using (H9) L wrench. step 3 - attaching the upholstered rails 3.
PAGE 4
king bed frame a ssem bly step 3 - attaching the upholstered rails continued 3.2 Push (G) upholstered side rails toward (H) upholstered foot rail to eliminate any gaps. Tighten (G) upholstered side rails first, then (H) upholstered foot rail using flat head screwdriver. 3.3 (OPTIONAL) To reinforce stability of (G, H) upholstered rails, use a phillips screwdriver to attach (H13) L brackets using (H12) screws. Please note: this requires screwing (H12) directly into the upholstered side rail.