Users Manual

6. Adjust Secure4K angle 7. Install and Calibrate the DMS camera
2. For optimal vision in and around your
vehicle, adjust the cameras position to
parallel with the road.
1. Use a coin to loosen the Dock hinge by
turning the adjustment slot
counter-clockwise.
3. Tighten the Dock into place by turning
the adjustment slot clockwise with a
coin.
11 12
DMS camera calibration process is to calibrate the DMS camera so that the DMS camera can detect
the driver's face and sight line so that the DMS camera can better detect and upload DMS events.
To calibrate the DMS camera, Waylens Fleet App should be used.
1. Install the DMS camera in the recommended
position as the picture shows.
2. Make sure that the DMS camera is upright.
1
2 3
3. Input the information of the vehicle where the
camera was installed.