Installation Guide

8
Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need.
You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com
NOTE: If you have a Torquemaster
®
counterbalance, skip this step and continue
with Step 2 on page 11. If you have a
Torquemaster
®
Plus counterbalance system,
complete Steps 2-4 on pages 8, 9 and 10.
IMPORTANT! RIGHT AND LEFT HAND IS
ALWAYS DETERMINED FROM INSIDE THE
GARAGE LOOKING OUT.
Drum wraps are identifi ed as right and left
hand.
Slide the left hand drum wrap over the
left side of the TorqueMaster
®
spring tube
assembly with the tabs facing left. Continue
sliding the left hand drum wrap towards the
center of the TorqueMaster
®
spring tube
assembly.
Slide the right hand drum wrap over the
right side of the TorqueMaster
®
spring
tube assembly with the tabs facing right.
Continue sliding the right hand drum wrap
towards the center of the TorqueMaster
®
TorqueMaster
®
Spring Tube
Assembly
Tabs
Left Hand Drum Wrap
Left Hand Drum Wrap
Right Hand Drum Wrap
Drum Wraps
2
Tools Needed:
None
TorqueMaster
®
Plus Installation