User Manual

1
Room Key Controller
Model: WDHKC-50
Description
The Room Key Controller is a battery operated Generic Z-Wave controller capable of
triggering one Z-wave scene with up to 230 devices. When a generic room key card is
inserted in the card slot, the Z-Wave scene triggers. The controller then goes to sleep to
save batteries. When the room key card is removed all devices included into the scene
will trigger to the “off” state. Thermostats trigger to the “normal” mode when the card is
inserted, and to the “energy save” mode when the card is removed. Heat and cool are
selected automatically by a threshold. Out of the factory, the thermostat threshold is set
to 72deg. F. If the ambient room temperature is cooler than the threshold, the thermostat
will switch to a heating mode. If the temperature is warmer than the threshold the
thermostat will switch to a cooling mode.
The Room Key Controller will send commands to devices supporting the basic command
set. Light fixtures, thermostats, window coverings, etc. can be set to a particular level as
long as they support the Z-Wave standard basic command set.
Package Contents
• Room Key Controller.
• Wall Bracket.
• Instruction Manual.
• Battery (123A).
• Faceplate screws (2).
• Wall Bracket screws (2).
Special Operation Modes
Thermostat Set Points
The Controller supports custom temperature settings for thermostats. There are four
supported modes listed below;
Energy save cool
Energy save heat
Cool
Heat