Installation Guide

itado en sistemas de puertas.
3. Lubricación: La puerta se debería abrir y cerrar suavemente. Asegúrese de que los
rodillos para riel de la puerta estén rotando libremente cuando abra y cierre la puerta. Si los
rodillos para riel no rotan libremente, limpie los rieles de la puerta, eliminando la suciedad y
todas las sustancias extrañas. Limpie y lubrique (utilice un lubricante que no sea a base de
silicona) las bisagras de extremo graduadas, las bisagras centrales, los rodillos para riel de
acero, los cojinetes y los resortes de torsión (superficies de enrollamiento de los resortes de
torsión). NO lubrique cojinetes deslizantes de plástico, rodillos para riel de nylon ni riel de
puerta. NO aplique aceite a una cerradura de cilindro. Si el accionamiento es difícil, utilice un
polvo de grafito para lubricar.
COMPRUEBE LA PRESENCIA DE ETIQUETAS DE SEGURIDAD:
The adjacent bottom corner
bracket and all cable
retention features including
milford pins, cotter pins, &
clevis pins are under HIGH
SPRING TENSION.
262484 REV1 01/08/10
WARNING
Repairs and adjustments
must be made by an
experienced door
professional or mechanic,
using proper tools and
instructions.
DO NOT REMOVE, COVER OR
PAINT THIS LABEL.
© Copyright 2010 Wayne-Dalton,
a Division of Overhead Door Corp.
The adjacent bottom corner
bracket and all cable
retention features including
milford pins, cotter pins, &
clevis pins are under HIGH
SPRING TENSION.
262484 REV1 01/08/10
WARNING
Repairs and adjustments
must be made by an
experienced door
professional or mechanic,
using proper tools and
instructions.
DO NOT REMOVE, COVER OR
PAINT THIS LABEL.
© Copyright 2010 Wayne-Dalton,
a Division of Overhead Door Corp.
WHEN CONNECTING A TROLLEY TYPE GARAGE DOOR
OPENER TO THIS DOOR, A WAYNE-DALTON
OPENER/TROLLEY BRACKET MUST BE SECURELY
ATTACHED TO THE TOP SECTION OF THE DOOR, ALONG
WITH ANY U-BARS PROVIDED WITH THE DOOR. THE
INSTALLATION OF THE OPENER MUST BE ACCORDING TO
MANUFACTURER’S INSTRUCTIONS AND FORCE SETTINGS
MUST BE ADJUSTED PROPERLY.
323917 REV2 01/15/2010
IMPORTANT!
Copyright 2010 Wayne Dalton, a Division of Overhead Door Corp.
HIGH SPRING TENSION CAN CAUSE
SERIOUS INJURY OR DEATH.
DO NOT adjust, repair or remove springs or parts to
which springs are connected, such as steel brack-
ets, cables, wood blocks, fasteners or other parts of
the counterbalance system.
Adjustments or repairs must ONLY be made by a
trained door systems technician using proper tools
and instructions.
DO NOT remove, cover or paint over this tag. Prod-
uct user should inspect this tag periodically for
legibility and should order a replacement tag from
the door manufacturer, as needed.
©Copyright 2010 Overhead Door Corporation 102081 REV2 06/24/2010
SAFETY INSTRUCTIONS
1. Operate door ONLY when it is properly
adjusted and free of obstructions.
2. If a door becomes hard to operate,
inoperative or is damaged, immediately
have necessary adjustments and/or repairs
made by a trained door system technician
using proper tools and instructions.
3. DO NOT stand or walk under a moving door,
or permit anybody to stand or walk under
an electrically operated door.
4. DO NOT place fingers or hands into open
section joints when closing a door. Use lift
handles/gripping points when operating
door manually.
5. DO NOT permit children to operate garage
door or door controls.
6. Due to constant extreme spring tension,
DO NOT attempt any adjustment, repair or
alteration to any part of the door,
especially to springs, spring brackets,
bottom corner brackets, red colored
fasteners, cables or supports. To avoid
possible severe or fatal injury, have any
such work performed by a trained door
system technician using proper tools and
instructions.
7. On electrically operated doors, pull down
ropes must be removed and locks must be
removed or made inoperative in the open
(unlocked) position.
8. To p section of door may need to be
reinforced when attaching an electric
opener. Check door and/or opener
manufacturer’s instructions.
9. VISUALLY inspect door and hardware
monthly for worn and/or broken parts.
Check to ensure door operates freely.
10. Test electric opener’s safety features
monthly, following opener manufacturer’s
instructions.
11. NEVER hang tools, bicycles, hoses, clothing
or anything else from horizontal tracks.
Track systems are not intended or designed
to support such extra weight.
Place label at a readable height on door. DO NOT
remove, cover or paint over this label. Product
user should inspect this label periodically for
legibility and should order a replacement label
from the door manufacturer as needed.
324100 REV7 09/16/2013
Quality garage doors since 1954
Wayne Dalton
2501 S. State Hwy 121 Bus., Suite 200
Lewisville, TX 75067
For service, call [phone]
www.Wayne-Dalton.com
Copyright 2013 Wayne Dalton, a
Division of Overhead Door Corp.
300547 REV3 12/16/2020
©Copyright 2020 Wayne Dalton, a
division of Overhead Door Corporation
Ratchet Pawl
IDENTIFYING ENGAGMENT
Cable Drum
Drum Pawl
No space between pawl and cable
drum indicates engagement.
ENGAGED UNDERNEATH VIEW
No space
between pawl
and cable drum
indicates
engagement.
WARNING! RESET, ADJUSTMENT OR REPAIR OF TM
PLUS BRACKET, RATCHET, CABLES, OR SPRINGS MUST BE
DONE BY A TRAINED DOOR SYSTEMS TECHNICIAN.
The TorqueMaster
®
Plus (TM Plus) system includes a safety
feature that prevents a door from rapidly descending if a spring
breaks. When engaged, the door can be opened, making a distinct
“clicking” noise, but may be prevented from closing. Refer to the
images below to determine if the TM Plus system is engaged.
Contact your local door dealer for repairs if
engagement has occurred. Instruction manuals are available at
www.Wayne-Dalton.com for more information.
Avoid electric operation when TM Plus has engaged to prevent
possible damage to the door. Ensure opener’s force s
ensitivity has
been set in accordance with the manufacturer’s instructions. The
Limited Warranty of this door does not cover damage due to
improper force settings.
Number of Installed Spring Turns ____
Etiqueta de advertencias para el modelo residencial
La etiqueta de advertencias estará en el montante
de extremo ya sea derecho o izquierdo.
Etiqueta del soporte
del operador de la
barra de tracción
Etiquetas de advertencias de soporte
esquinero inferior
Etiqueta(s) de los
resortes de torsión
(una por resorte)
Etiqueta(s) TorqueMaster
®
Plus (una por resorte)
18