Technical Specifications

WELL PUMPS
W ater Systems
Wayne Water Systems
100 Production Drive
Harrison, Ohio 45030
1-888-299-2963
www.waynepumps.com
29
• High efficiency square
flange motor is thermally
protected to prevent over-
heating and universally
available if replacement is
ever required
• Dual voltage available
(115/230), factory wired
for 115 volts
• Pressure switch pre-set at
30-50 psi for automatic
operation when used with
water system tank
• Cast iron volute for
durability
• Reinforced thermoplastic
impeller and diffuser for
corrosion-resistance
• 3/4” NPT discharge 1
1
/4”
NPT suction, 1” NPT drive
• Built-in control valve for
best performance on deep
well applications
• Dedicated priming port for
convenient volute filling
Wayne's convertible deep well jet pumps are engineered
to pump water from 0-100 ft. lifts. Convertible deep well
jet pumps require jet assembly to complete installation.
See chart below for jet assembly guide.
Y
E
A
R
W
A
R
R
A
N
T
Y
3
3
5
10
15
20
25
30
0 100 200 300 400 500 600
POUNDS PER SQUARE INCH (PSI)
GALLONS PER HOUR
CWS50
CWS75
CWS100
FEATURES & BENEFITS
PERFORMANCE CURVE
CWS 100/75/50
CONVERTIBLE
DEEP WELL JET PUMPS
Model Jet Assembly Water Lift Jet Type Drop Pipe Well Diameter
56326-WYN1 0’ - 25’ Shallow Single –
56319-WYN1 30’ - 50’ Deep Single 2”
55462-WYN1 50’ - 70’ Deep Single 2”
CWS50
56324-WYN1 30’ - 40’ Deep Double 4” Minimum
56317-WYN1 40’ - 70’ Deep Double 4” Minimum
55465-WYN1 60’ - 90’ Deep Double 4” Minimum
56316-WYN1 0’ - 25’ Shallow Single –
56322-WYN1 30’ - 50’ Deep Single 2”
CWS75 55462-WYN1 60’ - 80’ Deep Single 2”
56324-WYN1 30’ - 50’ Deep Double 4” Minimum
55465-WYN1 60’ - 100’ Deep Double 4” Minimum
56316-WYN1 0’ - 25’ Shallow Single –
56322-WYN1 30’ - 50’ Deep Single 2”
56319-WYN1 60’ - 80’ Deep Single 2”
CWS100
56324-WYN1 30’ - 50’ Deep Double 4” Minimum
56317-WYN1 60’ - 80’ Deep Double 4” Minimum
55465-WYN1 90’ - 100’ Deep Double 4” Minimum
CONVERTIBLE WELL PUMP JET ASSEMBLY GUIDE
All Wayne CWS jet pumps require a jet assem-
bly to complete installation. The Shallow Well
Jet Assembly mounts directly to the front of
CWS pump, while the 2" and 4" Well Jet
Assemblies are installed in the well itself.
JET & WELL ASSEMBLIES
SHALLOW WELL
JET ASSEMBLY:
• Jet body
• Venturi
• Nozzle
• Gasket
• Mounting screws
2” JET
ASSEMBLY:
• Jet body
• Jet packer
• Well adapter
• Venturi
• Nozzle
• Foot valve
4” JET
ASSEMBLY:
• Jet body
• Venturi
• Nozzle
Flow Capacity (GPH) at Different Suction Lifts (Feet)*
Model HP 5’ 10’ 15’ 20’ 25’
CWS100 1 560 495 430 365 300
CWS75 3/4 510 450 390 330 270
CWS50 1/2 310 280 240 210 180
PERFORMANCE CHART
* Performance shown @ 50 PSI discharge pressure
CONVERTIBLE WELL JET PUMPS