Operation Manual

Installing your unit
Open the package and remove the protective foam sleeve from the unit.
Install the Digital Picture Frame stand as the back of the unit.
Plug in the AC adapter into power outlet. Plug the other end into the unit.
Insert the media into the correct slot.
Turn power to ON position via the ON/OFF switch.
Connecting to a PC
The Digital Picture Frame has a USB port for connection to a PC (USB Slave) and a
second USB port for connection to other devices such as a Flash Drive, USB card
reader, or a camera (USB Host). When connected to the PC you can drag-and-drop
content from the PC to the memory card.
NOTE: USB Slave and USB Host can not be used at the same time.
Operation
This Digital Frame is extremely easy to operate:
1. Remove memory card from camera:
2. Insert memory card into the frame with face away from
the unit:
3. The slideshow will start automatically: