Operation Manual

Specifications
Type
DF 710/DF 1040 Digital Picture Frame
Size
7/10.4 INCH
Resolution
800x600
Alimentation
12 V
Consumption
6 Watts
Working Temperature
-20 to +65 degrees
Response Time
25ms
Display Mode
4:3
File Format
JPEG, MPEG1, MPEG2, MP3, MPEG4
Photo Size
12 Mega Pixels
Current
AC110—240V (50HZ—60HZ)
Cards
SD/MMC/MS/USB
USB ports
USB Host, USB Slave
Package Contents
Digital Picture Frame
AC/DC Adapter
User Guide
Remote control
USB Cable
Maintenance and Precaution
The Digital Picture Frame is for indoor use only.
To reduce the risk of fire or electric shock; do not expose this appliance to rain or
moisture.
Do not block the ventilation holes on the back of the Picture Frame at any time.
Keep your Digital Picture Frames out of sunlight. Direct sunlight may cause damage.
Do not open the case of the Digital Picture Frame. There is a risk of electric shock,
and there are no user serviceable parts inside. Opening the case will void your
warranty.
Do not use the Digital Picture Frame if conditions could allow condensation to occur,
or damage may result.
Your Digital Picture Frame is a complicated electronic device and cannot withstand
shock from drops.
Cleaning the LCD screen
Treat the screen gently. The screen on the Digital Picture Frame is made of glass
and can be scratched or broken.
If fingerprints or dust make the LCD screen dirty, we recommend using a soft, non-
abrasive cloth such as a camera lens cloth to clean the LCD screen.
If you use an LCD Cleaning Kit sold on the market, apply the cleaning liquid to the
cloth. Do not apply the liquid directly to your LCD screen.