User Guide

8
III - SETTINGS
Set Up Wi-Fi Connection
Make Wi-Fi Connection In Settings  Wireless & networks  Wi-Fi, slide the Wi-Fi switch to the ON position.
Normally, the device will automatically scan the available Wi-Fi Access Point (AP). If this does not happen, select
Scan (upper right corner) to scan for the available Wi-Fi APs. Then, tap on the desired AP to make the connection.
If it is a secured AP, system will prompt you for the password. Enter it by tapping on the password entry line, and
use the onscreen keyboard to enter the password. Then, tap on the Connect to start connecting to that AP.
When connection is established, the Wi-Fi connected icon will show up on the status bar.
Set up 3G Function
1. In More option of Wireless & network settings, tap in Mobile networks, make sure the Data enabled is
checked on before you connect to the mobile network.
2. To enable 3G function of your Personal Touch Tablet, insert a SIM card into it first. Power on the device, it will
search for 3G signal automatically.
3. When connection is established, the 3G connected icon will show up on the status bar.
4. In Access Point Names, select your favor APN.
*Turn off Wi-Fi signal before setting up 3G function.
*Roaming date may incur significant roaming charge.